zhangxingyu
/
BMS
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1 Commit
1 Branch
0 Tags
3.3 MiB
Tree: 2aedaab0b0
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '2aedaab0b0'
${ noResults }
BMS/firmware/n32g45x_std_periph_driver/inc/n32g45x_dvp.h

594 lines
22 KiB
Raw Normal View History Unescape

BMS第一次提交
2 days ago
/*****************************************************************************
* Copyright (c) 2019, Nations Technologies Inc.
*
* All rights reserved.
* ****************************************************************************
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Nations' name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY NATIONS "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL NATIONS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ****************************************************************************/
/**
* @file n32g45x_dvp.h
* @author Nations
* @version v1.0.1
*
* @copyright Copyright (c) 2019, Nations Technologies Inc. All rights reserved.
*/
#ifndef __N32G45X_DVP_H__
#define __N32G45X_DVP_H__
#ifdef __cplusplus
extern "C" {
#endif
#include "n32g45x.h"
/** @addtogroup N32G45X_StdPeriph_Driver
* @{
*/
/** @addtogroup DVP
* @brief DVP driver modules
* @{
*/
/** @addtogroup DVP_Exported_Types
* @{
*/
/**
* @brief DVP Init Structure definition
*/
typedef struct
{
uint32_t FifoWatermark; /*!< Specifies the max number of fifo data which will request INT or DMA
This parameter can be a value of @ref DVP_FifoWatermark */
uint16_t LineCapture; /*!< Specifies the number of data line captuered in x lines.
This parameter can be a value of @ref DVP_LineSelect_Mode */
uint16_t ByteCapture; /*!< Specifies the number of stop byte captuered in x bytes.
This parameter can be a value of @ref DVP_ByteSelect_Mode */
uint16_t DataInvert; /*!< Specifies the data invert.
This parameter can be a value of @ref DVP_DATA_INVERT */
uint16_t PixelClkPolarity; /*!< Specifies the pixel clock polarity
This parameter can be a value of @ref DVP_Pixel_Polarity */
uint16_t VsyncPolarity; /*!< Specifies the vertical synchronization polarity
This parameter can be a value of @ref DVP_Vsync_Polarity */
uint16_t HsyncPolarity; /*!< Specifies the Horizontal synchronization polarity
This parameter can be a value of @ref DVP_Hsync_Polarity */
uint16_t CaptureMode; /*!< Specifies the capture mode.
This parameter can be a value of @ref DVP_Capture_Mode */
uint16_t RowStart; /*!< Specifies the startint row of the pixel array in a frame */
uint16_t ColumnStart; /*!< Specifies the starting column of the pixel array row in a frame */
uint16_t ImageHeight; /*!< Specifies the image's height in a frame */
uint16_t ImageWidth; /*!< Specifies the image's width in a frame */
} DVP_InitType;
/**
* @}
*/
/** @addtogroup DVP_Exported_Constants
* @{
*/
/** @addtogroup DVP_FIFO_SOFT_RESET
* @{
*/
#define DVP_FIFO_SOFT_RESET (DVP_CTRL_FFSWRST)
/**
* @}
*/
/** @addtogroup DVP_LineSelect_Mode
* @{
*/
#define DVP_LINE_CAPTURE_ALL (0x00000000)
#define DVP_LINE_CAPTURE_1_2 (0x1UL << DVP_CTRL_LSM_SHIFT)
#define DVP_LINE_CAPTURE_1_3 (0x2UL << DVP_CTRL_LSM_SHIFT)
#define DVP_LINE_CAPTURE_1_4 (0x3UL << DVP_CTRL_LSM_SHIFT)
#define DVP_LINE_CAPTURE_1_5 (0x4UL << DVP_CTRL_LSM_SHIFT)
#define DVP_LINE_CAPTURE_1_6 (0x5UL << DVP_CTRL_LSM_SHIFT)
#define DVP_LINE_CAPTURE_1_7 (0x6UL << DVP_CTRL_LSM_SHIFT)
#define DVP_LINE_CAPTURE_1_8 (0x7UL << DVP_CTRL_LSM_SHIFT)
#define IS_DVP_LINE_CAPTURE(_LSM_) (((_LSM_) & (~DVP_CTRL_LSM_MASK) )==0)
/**
* @}
*/
/** @addtogroup DVP_ByteSelect_Mode
* @{
*/
#define DVP_BYTE_CAPTURE_ALL (0x00000000)
#define DVP_BYTE_CAPTURE_1_2 (0x1UL << DVP_CTRL_BSM_SHIFT)
#define DVP_BYTE_CAPTURE_1_3 (0x2UL << DVP_CTRL_BSM_SHIFT)
#define DVP_BYTE_CAPTURE_1_4 (0x3UL << DVP_CTRL_BSM_SHIFT)
#define DVP_BYTE_CAPTURE_1_5 (0x4UL << DVP_CTRL_BSM_SHIFT)
#define DVP_BYTE_CAPTURE_1_6 (0x5UL << DVP_CTRL_BSM_SHIFT)
#define DVP_BYTE_CAPTURE_1_7 (0x6UL << DVP_CTRL_BSM_SHIFT)
#define DVP_BYTE_CAPTURE_1_8 (0x7UL << DVP_CTRL_BSM_SHIFT)
#define IS_DVP_BYTE_CAPTURE(_BSM_) (((_BSM_) & (~DVP_CTRL_BSM_MASK) )==0)
/**
* @}
*/
/** @addtogroup DVP_DATA_INVERT
* @{
*/
#define DVP_DATA_INVERT (DVP_CTRL_DATINV)
#define DVP_DATA_NOTINVERT (0x00000000)
#define IS_DVP_DATA_INVERT(_INV_) (((_INV_) & (~DVP_CTRL_DATINV_MASK) )==0)
/**
* @}
*/
/** @addtogroup DVP_Pixel_Polarity
* @{
*/
#define DVP_PIXEL_POLARITY_FALLING (0x00000000)
#define DVP_PIXEL_POLARITY_RISING (DVP_CTRL_PCKPOL)
#define IS_DVP_PIXEL_POLARITY(_POL_) (((_POL_) & (~DVP_CTRL_PCKPOL_MASK) )==0)
/**
* @}
*/
/** @addtogroup DVP_FifoWatermark
* @{
*/
#define DVP_WATER_MARK_1 (0x1UL << DVP_CTRL_FWM_SHIFT)
#define DVP_WATER_MARK_2 (0x2UL << DVP_CTRL_FWM_SHIFT)
#define DVP_WATER_MARK_3 (0x3UL << DVP_CTRL_FWM_SHIFT)
#define DVP_WATER_MARK_4 (0x4UL << DVP_CTRL_FWM_SHIFT)
#define IS_DVP_FIFOWATERMARK(_WATER_) (((_WATER_) >= DVP_WATER_MARK_1) && ((_WATER_) <= DVP_WATER_MARK_4))
/** @addtogroup DVP_Vsync_Polarity
* @{
*/
#define DVP_VSYNC_POLARITY_HIGH (DVP_CTRL_VSPOL)
#define DVP_VSYNC_POLARITY_LOW (0x00000000)
#define IS_DVP_VSYNC_POLARITY(_POL_) (((_POL_) == DVP_VSYNC_POLARITY_HIGH) || ((_POL_) == DVP_VSYNC_POLARITY_LOW))
/**
* @}
*/
/** @addtogroup DVP_Hsync_Polarity
* @{
*/
#define DVP_HSYNC_POLARITY_HIGH (DVP_CTRL_HSPOL)
#define DVP_HSYNC_POLARITY_LOW (0x00000000)
#define IS_DVP_HSYNC_POLARITY(_POL_) (((_POL_) == DVP_HSYNC_POLARITY_HIGH) || ((_POL_) == DVP_HSYNC_POLARITY_LOW))
/**
* @}
*/
/** @addtogroup DVP_Capture_Mode
* @{
*/
#define DVP_CAPTURE_MODE_SINGLE (0x00000000)
#define DVP_CAPTURE_MODE_CONTINUE (DVP_CTRL_CM)
#define IS_DVP_CAPTURE_MODE(_MODE_) (((_MODE_) == DVP_CAPTURE_MODE_SINGLE) || ((_MODE_) == DVP_CAPTURE_MODE_CONTINUE))
/**
* @}
*/
/** @addtogroup DVP_CAPTURE_ENABLE
* @{
*/
#define DVP_CAPTURE_DISABLE (0x00000000)
#define DVP_CAPTURE_ENABLE (DVP_CTRL_CAPTURE)
#define IS_DVP_CAPTURE(_CAPTURE_) (((_CAPTURE_) == DVP_CAPTURE_DISABLE) || ((_CAPTURE_) == DVP_CAPTURE_ENABLE))
/**
* @}
*/
/** @addtogroup DVP_DMA
* @{
*/
#define DVP_DMA_DISABLE (0x00000000)
#define DVP_DMA_ENABLE (DVP_INTEN_DMAEN)
/**
* @}
*/
/** @addtogroup DVP_StatusFlag
* @{
*/
#define DVP_FLAG_HERR (DVP_INTSTS_HERRIS)
#define DVP_FLAG_VERR (DVP_INTSTS_VERRIS)
#define DVP_FLAG_FO (DVP_INTSTS_FOIS)
#define DVP_FLAG_FW (DVP_INTSTS_FWIS)
#define DVP_FLAG_FF (DVP_INTSTS_FFIS)
#define DVP_FLAG_FE (DVP_INTSTS_FEIS)
#define DVP_FLAG_LE (DVP_INTSTS_LEIS)
#define DVP_FLAG_LS (DVP_INTSTS_LSIS)
#define DVP_FLAG_FME (DVP_INTSTS_FMEIS)
#define DVP_FLAG_FMS (DVP_INTSTS_FMSIS)
#define DVP_FLAG_MASK (DVP_FLAG_HERR |DVP_FLAG_VERR |DVP_FLAG_FO \
|DVP_FLAG_FW |DVP_FLAG_FF |DVP_FLAG_FE \
|DVP_FLAG_LE |DVP_FLAG_LS |DVP_FLAG_FME \
|DVP_FLAG_FMS)
#define IS_DVP_FLAG(_FLAG_) (((_FLAG_) & (~DVP_FLAG_MASK))==0)
/** @addtogroup DVP_ClearFlag
* @{
*/
#define DVP_CLEAR_FLAG_HERR (DVP_INTSTS_HERRIS)
#define DVP_CLEAR_FLAG_VERR (DVP_INTSTS_VERRIS)
#define DVP_CLEAR_FLAG_FO (DVP_INTSTS_FOIS)
#define DVP_CLEAR_FLAG_FE (DVP_INTSTS_FEIS)
#define DVP_CLEAR_FLAG_LE (DVP_INTSTS_LEIS)
#define DVP_CLEAR_FLAG_LS (DVP_INTSTS_LSIS)
#define DVP_CLEAR_FLAG_FME (DVP_INTSTS_FMEIS)
#define DVP_CLEAR_FLAG_FMS (DVP_INTSTS_FMSIS)
#define DVP_CLEAR_FLAG_MASK (DVP_CLEAR_FLAG_HERR |DVP_CLEAR_FLAG_VERR \
|DVP_CLEAR_FLAG_FO |DVP_CLEAR_FLAG_FE \
|DVP_CLEAR_FLAG_LE |DVP_CLEAR_FLAG_LS \
|DVP_CLEAR_FLAG_FME |DVP_CLEAR_FLAG_FMS)
#define IS_DVP_CLEAR_FLAG(_FLAG_) (((_FLAG_) & (~DVP_CLEAR_FLAG_MASK))==0)
/**
* @}
*/
/** @addtogroup DVP_IntEnable
* @{
*/
#define DVP_INTEN_HERR (DVP_INTEN_HERRIE)
#define DVP_INTEN_VERR (DVP_INTEN_VERRIE)
#define DVP_INTEN_FO (DVP_INTEN_FOIE)
#define DVP_INTEN_FW (DVP_INTEN_FWIE)
#define DVP_INTEN_FF (DVP_INTEN_FFIE)
#define DVP_INTEN_FE (DVP_INTEN_FEIE)
#define DVP_INTEN_LE (DVP_INTEN_LEIE)
#define DVP_INTEN_LS (DVP_INTEN_LSIE)
#define DVP_INTEN_FME (DVP_INTEN_FMEIE)
#define DVP_INTEN_FMS (DVP_INTEN_FMSIE)
#define DVP_INTEN_MASK (DVP_INTEN_HERR |DVP_INTEN_VERR |DVP_INTEN_FO |DVP_INTEN_FW \
|DVP_INTEN_FF |DVP_INTEN_FE |DVP_INTEN_LE |DVP_INTEN_LS \
|DVP_INTEN_FME |DVP_INTEN_FMS)
#define IS_DVP_INTEN(_INT_) (((_INT_) & (~DVP_INTEN_MASK))==0)
/**
* @}
*/
/** @addtogroup DVP_IntMark
* @{
*/
#define DVP_MINT_HERR (DVP_MINTSTS_HERRMIS)
#define DVP_MINT_VERR (DVP_MINTSTS_VERRMIS)
#define DVP_MINT_FO (DVP_MINTSTS_FOMIS)
#define DVP_MINT_FW (DVP_MINTSTS_FWMIS)
#define DVP_MINT_FF (DVP_MINTSTS_FFMIS)
#define DVP_MINT_FE (DVP_MINTSTS_FEMIS)
#define DVP_MINT_LE (DVP_MINTSTS_LEMIS)
#define DVP_MINT_LS (DVP_MINTSTS_LSMIS)
#define DVP_MINT_FME (DVP_MINTSTS_FMEMIS)
#define DVP_MINT_FMS (DVP_MINTSTS_FMSMIS)
#define DVP_MINT_MASK (DVP_MINT_HERR |DVP_MINT_VERR |DVP_MINT_FO |DVP_MINT_FW \
|DVP_MINT_FF |DVP_MINT_FE |DVP_MINT_LE |DVP_MINT_LS \
|DVP_MINT_FME |DVP_MINT_FMS)
#define IS_DVP_MINT(_MINT_) (((_MINT_) & (~DVP_MINT_MASK))==0)
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @addtogroup DVP_Exported_Macros
* @{
*/
/**
* @brief Config the water mark of FIFO.
* @param _Watermark_ Select the new water mark of FIFO.
* This parameter can be one of the following values:
* @arg DVP_WATER_MARK_1
* @arg DVP_WATER_MARK_2
* @arg DVP_WATER_MARK_3
* @arg DVP_WATER_MARK_4
* @retval None
*/
#define __DVP_SetFifoWatermark(_Watermark_) (MODIFY_REG(DVP->CTRL, DVP_CTRL_FWM_MASK, _Watermark_))
/**
* @brief Config the line capture mode.
* @param _LSM_ Specifies the new mode of line capture.
* This parameter can be one of the following values:
* @arg DVP_LINE_CAPTURE_ALL Capture all lines
* @arg DVP_LINE_CAPTURE_1_2 Capture 1 line of each 2 lines
* @arg DVP_LINE_CAPTURE_1_3 Capture 1 line of each 3 lines
* @arg DVP_LINE_CAPTURE_1_4 Capture 1 line of each 4 lines
* @arg DVP_LINE_CAPTURE_1_5 Capture 1 line of each 5 lines
* @arg DVP_LINE_CAPTURE_1_6 Capture 1 line of each 6 lines
* @arg DVP_LINE_CAPTURE_1_7 Capture 1 line of each 7 lines
* @arg DVP_LINE_CAPTURE_1_8 Capture 1 line of each 8 lines
* @retval None
*/
#define __DVP_SetLineCaptureMode(_LSM_) (MODIFY_REG(DVP->CTRL, DVP_CTRL_LSM_MASK, _LSM_))
/**
* @brief Config the byte capture mode.
* @param _BSM_ Specifies the new mode of byte capture.
* This parameter can be one of the following values:
* @arg DVP_BYTE_CAPTURE_ALL Capture all pixels
* @arg DVP_BYTE_CAPTURE_1_2 Capture 1 pixel of each 2 pixels
* @arg DVP_BYTE_CAPTURE_1_3 Capture 1 pixel of each 3 pixels
* @arg DVP_BYTE_CAPTURE_1_4 Capture 1 pixel of each 4 pixels
* @arg DVP_BYTE_CAPTURE_1_5 Capture 1 pixel of each 5 pixels
* @arg DVP_BYTE_CAPTURE_1_6 Capture 1 pixel of each 6 pixels
* @arg DVP_BYTE_CAPTURE_1_7 Capture 1 pixel of each 7 pixels
* @arg DVP_BYTE_CAPTURE_1_8 Capture 1 pixel of each 8 pixels
* @retval None
*/
#define __DVP_SetByteCaptureMode(_BSM_) (MODIFY_REG(DVP->CTRL, DVP_CTRL_BSM_MASK, _BSM_))
/**
* @brief Config the data invert function.
* @param _INV_ Specifies the data invert or not.
* This parameter can be one of the following values:
* @arg DVP_DATA_INVERT Invert capture data
* @arg DVP_DATA_NOTINVERT Capture data not invert
* @retval None
*/
#define __DVP_SetDataInvert(_INV_) (MODIFY_REG(DVP->CTRL, DVP_CTRL_DATINV_MASK, _INV_))
/**
* @brief Config the pixel clock polarity.
* @param _POL_ Specifies the clock edge of pixel clock.
* This parameter can be one of the following values:
* @arg DVP_PIXEL_POLARITY_FALLING Get data at falling edge
* @arg DVP_PIXEL_POLARITY_RISING Get data at rising edge
* @retval None
*/
#define __DVP_SetPclkPol(_POL_) (MODIFY_REG(DVP->CTRL, DVP_CTRL_PCKPOL_MASK, _POL_))
/**
* @brief Config the VSYNC polarity.
* @param _POL_ Specifies the active polarity of VSYNC pin.
* This parameter can be one of the following values:
* @arg DVP_VSYNC_POLARITY_HIGH VSYNC active high
* @arg DVP_VSYNC_POLARITY_LOW VSYNC active low
* @retval None
*/
#define __DVP_SetVsyncPol(_POL_) (MODIFY_REG(DVP->CTRL, DVP_CTRL_VSPOL_MASK, _POL_))
/**
* @brief Config the HSYNC polarity.
* @param _POL_ Specifies the active polarity of HSYNC pin.
* This parameter can be one of the following values:
* @arg DVP_HSYNC_POLARITY_HIGH VSYNC active high
* @arg DVP_HSYNC_POLARITY_LOW VSYNC active low
* @retval None
*/
#define __DVP_SetHsyncPol(_POL_) (MODIFY_REG(DVP->CTRL, DVP_CTRL_HSPOL_MASK, _POL_))
/**
* @brief Config the capture mode.
* @param _POL_ Specifies the new capture mode.
* This parameter can be one of the following values:
* @arg DVP_CAPTURE_MODE_SINGLE Capture one frame
* @arg DVP_CAPTURE_MODE_CONTINUE Capture many frames
* @retval None
*/
#define __DVP_SetCaptureMode(_MODE_) (MODIFY_REG(DVP->CTRL, DVP_CTRL_CM_MASK, _MODE_))
/**
* @brief Enable DVP interface.
* @param None
* @retval None
*/
#define __DVP_StartCapture() (SET_BIT(DVP->CTRL, DVP_CAPTURE_ENABLE))
/**
* @brief Disable DVP interface.
* @param None
* @retval None
*/
#define __DVP_StopCapture() (CLEAR_BIT(DVP->CTRL, DVP_CAPTURE_ENABLE))
/**
* @brief Disable DVP interface.
* @param None
* @retval None
*/
#define __FIFOIsNotEmpty() (READ_BIT(DVP->STS, DVP_STS_FNE))
/**
* @brief Checks whether the specified DVP flag is set.
* @param _FLAG_ specifies the flag to check.
* This parameter can be any combination of the following values:
* @arg DVP_FLAG_HERR Hsync error interrupt flag
* @arg DVP_FLAG_VERR Vsync error interrupt flag
* @arg DVP_FLAG_FO FIFO overflow intterrupt flag
* @arg DVP_FLAG_FW FIFO watermark interrupt flag
* @arg DVP_FLAG_FF FIFO full interrupt flag
* @arg DVP_FLAG_FE FIFO empty interrupt flag
* @arg DVP_FLAG_LE Line end interrupt flag
* @arg DVP_FLAG_LS Line start interrupt flag
* @arg DVP_FLAG_FME Frame end interrupt flag
* @arg DVP_FLAG_FMS Frame start interrupt flag
* @retval true or false.
*/
#define __DVP_FlagIsSet(_FLAG_) (((DVP->INTSTS) & (_FLAG_))==(_FLAG_))
/**
* @brief Checks whether the specified DVP flag is not set.
* @param _FLAG_ specifies the flag to check.
* This parameter can be any combination of the following values:
* @arg DVP_FLAG_HERR Hsync error interrupt flag
* @arg DVP_FLAG_VERR Vsync error interrupt flag
* @arg DVP_FLAG_FO FIFO overflow intterrupt flag
* @arg DVP_FLAG_FW FIFO watermark interrupt flag
* @arg DVP_FLAG_FF FIFO full interrupt flag
* @arg DVP_FLAG_FE FIFO empty interrupt flag
* @arg DVP_FLAG_LE Line end interrupt flag
* @arg DVP_FLAG_LS Line start interrupt flag
* @arg DVP_FLAG_FME Frame end interrupt flag
* @arg DVP_FLAG_FMS Frame start interrupt flag
* @retval true or false.
*/
#define __DVP_FlagIsNotSet(_FLAG_) (((DVP->INTSTS) & (_FLAG_))!=(_FLAG_))
/**
* @brief Clears the DVP flags.
* @param _FLAG_ specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg DVP_CLEAR_FLAG_HERR Hsync error interrupt flag clear
* @arg DVP_CLEAR_FLAG_VERR Vsync error interrupt flag clear
* @arg DVP_CLEAR_FLAG_FO FIFO overflow intterrupt flag clear
* @arg DVP_CLEAR_FLAG_FE FIFO empty interrupt flag clear
* @arg DVP_CLEAR_FLAG_LE Line end interrupt flag clear
* @arg DVP_CLEAR_FLAG_LS Line start interrupt flag clear
* @arg DVP_CLEAR_FLAG_FME Frame end interrupt flag clear
* @arg DVP_CLEAR_FLAG_FMS Frame start interrupt flag clear
* @retval None.
*/
#define __DVP_ClrFlag(_FLAG_) (CLEAR_BIT(DVP->INTSTS, _FLAG_))
/**
* @brief Enable DVP interrupts.
* @param _INT_ specifies the interrupt to be enable.
* This parameter can be any combination of the following values:
* @arg DVP_INTEN_HERR Hsync error interrupt enable
* @arg DVP_INTEN_VERR Vsync error interrupt enable
* @arg DVP_INTEN_FO FIFO overflow intterrupt enable
* @arg DVP_INTEN_FE FIFO empty interrupt enable
* @arg DVP_INTEN_LE Line end interrupt enable
* @arg DVP_INTEN_LS Line start interrupt enable
* @arg DVP_INTEN_FME Frame end interrupt enable
* @arg DVP_INTEN_FMS Frame start interrupt enable
* @retval None.
*/
#define __DVP_EnableInt(_INT_) (SET_BIT(DVP->INTEN, _INT_))
/**
* @brief Disable DVP interrupts.
* @param _INT_ specifies the interrupt to be disable.
* This parameter can be any combination of the following values:
* @arg DVP_INTEN_HERR Hsync error interrupt disable
* @arg DVP_INTEN_VERR Vsync error interrupt disable
* @arg DVP_INTEN_FO FIFO overflow intterrupt disable
* @arg DVP_INTEN_FE FIFO empty interrupt disable
* @arg DVP_INTEN_LE Line end interrupt disable
* @arg DVP_INTEN_LS Line start interrupt disable
* @arg DVP_INTEN_FME Frame end interrupt disable
* @arg DVP_INTEN_FMS Frame start interrupt disable
* @retval None.
*/
#define __DVP_DisableInt(_INT_) (CLEAR_BIT(DVP->INTEN, _INT_))
/**
* @brief Enable DVP DMA.
* @param None.
* @retval None.
*/
#define __DVP_EnableDMA() (SET_BIT(DVP->INTEN, DVP_INTEN_DMAEN))
/**
* @brief Enable DVP DMA.
* @param None.
* @retval None.
*/
#define __DVP_DisableDMA() (CLEAR_BIT(DVP->INTEN, DVP_INTEN_DMAEN))
/**
* @brief Checks whether the specified DVP interrupt has occurred or not.
* @param _INT_ specifies the DVP interrupt source to check.
* This parameter can be one of the following values:
* @arg DVP_MINT_HERR Hsync error interrupt
* @arg DVP_MINT_VERR Vsync error interrupt
* @arg DVP_MINT_FO FIFO overflow intterrupt
* @arg DVP_MINT_FW FIFO watermark interrupt
* @arg DVP_MINT_FF FIFO full interrupt
* @arg DVP_MINT_FE FIFO empty interrupt
* @arg DVP_MINT_LE Line end interrupt
* @arg DVP_MINT_LS Line start interrupt
* @arg DVP_MINT_FME Frame end interrupt
* @arg DVP_MINT_FMS Frame start interrupt
* @retval The state of _INT_ (SET or RESET).
*/
#define __DVP_GetIntMark(_INT_) (((DVP->MINTSTS) & (_INT_))==(_INT_))
/**
* @brief Config the positon of first capture pixel .
* @param _VST_ specifies the line positon.
* This parameter must be less than 2048.
* @param _HST_ specifies the pixel positon.
* This parameter must be less than 2048.
* @retval None.
*/
#define __DVP_SetStartSHIFT(_VST_,_HST_) (DVP->WST=((_VST_)<<DVP_WST_VST_SHIFT)|(_HST_))
/**
* @brief Config the size of capture picture (frame) .
* @param _VLINE_ specifies the total lines of a frame.
* This parameter must be less than 2048.
* @param _HCNT_ specifies the pixels of a line.
* This parameter must be less than 2048.
* @retval None.
*/
#define __DVP_SetPicSize(_VLINE_,_HCNT_) (DVP->WSIZE=((_VLINE_)<<DVP_WSIZE_VLINE_SHIFT)|(_HCNT_))
/**
* @brief Read data from FIFO.
* @param None.
* @retval Data in FIFO
*/
#define __DVP_ReadFIFO() (READ_REG(DVP->FIFO))
/**
* @}
*/
/** @addtogroup DVP_Exported_Functions
* @{
*/
void DVP_DeInit(void);
void DVP_Init(DVP_InitType* DVP_InitStruct);
void DVP_DafaultInitParam(DVP_InitType* DVP_InitStruct);
uint32_t DVP_GetFifoCount(void);
void DVP_ResetFifo(void);
void DVP_ConfigDma( FunctionalState Cmd);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif